--- On Thu, 2/19/09, TK <tk@...> wrote:

From: TK <tk@...>
Subject: [DynoMotion] V4.11 Released
To: DynoMotion@yahoogroups.com
Date: Thursday, February 19, 2009, 3:01 PM

Download KMotion Version 4.11 - 2/18/09 (KMotion  AND KFLOP) New_*

6 axes Coordinated Motion now supported

New Selectable Screen Faces for KMotionCNC

http://www.dynomoti on.com/Help/ KMotionCNC/ KMotionCNC. htm

Changes/Fixes from 4.10 - 4.11 - Details

Note: after downloading a new version, Flash new firmware into KMotion using the Config/Flash - New Version function.

 

From: TKSOFT <tk@...>
Subject: [DynoMotion] Re: KFlop Takes so long to start
To: DynoMotion@yahoogroups.com
Date: Thursday, June 25, 2009, 12:34 PM

Hi Azd,

How long do they Flash? With a USB connected and no application running they should flash for ~ 3 seconds. With no USB cable connected they should flash for ~1 second.

Does the board ever connect and work?
TK

--- In DynoMotion@yahoogro ups.com, Azd Md <azken98@... > wrote:
>
>
> Hi All,
> I am using Kflop withe the latest Firmware. the problem the cars green leds flashes for so long time, and i have to switch on and off the power to get it working.
> Is there any thing i can do to have it starts fast?
> Thank you all
> --- On Thu, 2/19/09, TK <tk@...> wrote:
>
> From: TK <tk@...>
> Subject: [DynoMotion] V4.11 Released
> To: DynoMotion@yahoogro ups.com
> Date: Thursday, February 19, 2009, 3:01 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Download KMotion
> Version 4.11 - 2/18/09 (KMotion 
> AND KFLOP) New*
>
> 6
> axes Coordinated Motion now supported
>
> New
> Selectable Screen Faces for KMotionCNC
>
> http://www.dynomoti on.com/Help/ KMotionCNC/ KMotionCNC. htm
>
> Changes/Fixes from 4.10 - 4.11 - Details
>
> Note: after
> downloading a new version, Flash new firmware into KMotion using the
> Config/Flash - New Version function.
>
>  
>

From: TKSOFT <tk@...>
Subject: [DynoMotion] Re: KFlop Takes so long to start
To: DynoMotion@yahoogroups.com
Date: Thursday, June 25, 2009, 12:34 PM

Hi Azd,

How long do they Flash? With a USB connected and no application running they should flash for ~ 3 seconds. With no USB cable connected they should flash for ~1 second.

Does the board ever connect and work?
TK

--- In DynoMotion@yahoogro ups.com, Azd Md <azken98@... > wrote:
>
>
> Hi All,
> I am using Kflop withe the latest Firmware. the problem the cars green leds flashes for so long time, and i have to switch on and off the power to get it working.
> Is there any thing i can do to have it starts fast?
> Thank you all
> --- On Thu, 2/19/09, TK <tk@...> wrote:
>
> From: TK <tk@...>
> Subject: [DynoMotion] V4.11 Released
> To: DynoMotion@yahoogro ups.com
> Date: Thursday, February 19, 2009, 3:01 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Download KMotion
> Version 4.11 - 2/18/09 (KMotion 
> AND KFLOP) New*
>
> 6
> axes Coordinated Motion now supported
>
> New
> Selectable Screen Faces for KMotionCNC
>
> http://www.dynomoti on.com/Help/ KMotionCNC/ KMotionCNC. htm
>
> Changes/Fixes from 4.10 - 4.11 - Details
>
> Note: after
> downloading a new version, Flash new firmware into KMotion using the
> Config/Flash - New Version function.
>
>  
>